Colour changer for 2 to 16 colours for 2kW luminaires -Wide angle - Profiles
DMX 512 and 0/+10V

Standard adapters :
-
215 x 215 - Ř 200 mm
-
245 x 245 - Ř 230 mm

PRESENTATION
Door mounted on hinges with 2 quick closing latches.
4 small brackets of which one can be turned to allow for the mounting of a barndoor or a filter.

 
  VENTILATION
Override gel ventilation using 1 Ř 92 mm fan.
2 modes are possible :
Fan set at maximum or off according to the lighting of the photoelectric cell.
Fan speed controlled from 0 to 100% by the control desk.
 
 

SPECIFICATIONS
- 2 to 16 colours
- Maximum gel roll lenght : 7 m.
- 3 scrolling speeds
- Fastest scrolling speeds : 3 secs for 16 colours
- Dimensions :
                       Height : 430 mm
                       Width : 390 mm
                       Depht : 85 mm
- Weight with adapter : 4.5 kg.

 
     
              Standard adapters :  
         
 
OPERATING
  • Colour changer with gel roll. Gel roll (not supplied) needs to be joined with high temperature tape.
  • Dual DC motors ensure that the gel roll remains tight.
  • Incorporated 230/240V power supply allows a single colour changer to be used and easy DMX 512 wiring; 3x0.222 cable, chain with other devices, dimmers, shutters, automatic luminaires ...
  • In analog mode, the maximum number of colours depends on the precision of the control desk.
  • Power supply card and microcontroller card can be disconnected from the front.

REMOTE CONTROL
  • DMX 512: high impedance. Analog : 0/+10 V DC /1mA.
  • Input and output through male and female XLR 5 sockets at the rear.
  • The control of other changers is possible even if one changer in the link has failed or if the power is off.
  • In the case of signal or power loss, the last gel position is maintained.
  • Yellow «DATA SIGNAL» LED flashes in proportion to the data value.
  • In analog mode, it is possible to adjust the levels of the control desk at 0 or 10 volts.

ASSIGNMENT OF CHANNEL NUMBERS
  • 3 encoding wheels at the front :
    001 to 512 : control of the colour changer in DMX 512
    000 : analog control
    513 to 599 : supplementary functions : ventilation, scrolling speed, automatic loading, check/test

COLOUR CALIBRATION
  • The length of the gel roll can vary according to the number of colours to be used as long as the maximum length is not exceeded.
  • After loading the gel roll, an initialization cycle calculates the length of the gel and then divides it into 256 levels to be DMX 512 compatible

VENTILATION
  • Override gel ventilation.
    2 modes are possible :
    - Fan set at maximum or off according to the lighting of the photoelectric cell.
    - Fan speed controlled from 0 to 100% by the control desk.
  • Green ‘FAN’ LED is lit for maximum ventilation and will flash when ventilation is reduced.

PROTECTION
  • In the event of jamming the power to the motors is automatically cut.
  • Red ‘ALARM’ LED indicates malfunction: roller jam, gel roll detaching from the roller, incorrect positioning of the gel etc.
  • Reset of alarms on the changer or from the control desk.
 

 


DIAFORA Colour changers
| home | products | retailers | contact |