Colour Changer for 2 to 24 colours For 2.5 kW - 4kW - 5kW - 6kW - 10kW Luminaires ARENA - MINIBRUTE 8 x 650 W - Large aperture - DMX 512 and 0/+10V

Delivered with adjustable adapter for 2.5 to 10 kW « LTM, POLLUX, DESISTI» luminaires Parts for 5kW «ADB’’ optional

High temperature plastic protective screen with six clip fixings. Rear mesh to mount Super Heat shield film to prolong the life of the gel roll.
The use of the protective screen and the heat shield gives better ventilation.


Override gel ventilation using 3 Ø 92 mm fans.
3 modes are possible :
Fan set at maximum or off according to the lighting of the photoelectric cell.
Fan speed controlled from 0 to 100% by the control desk.
Fan speed controlled by using the encoding wheels (from 40% to 100 %).


- 2 to 24 colours
- Maximum gel roll length : 18m
- 3 scrolling speeds
- Fastest scrolling speeds :
10 secs for 24 colours, 5 secs for 11 colours
- Dimensions :
                     Height : 680 mm
                     Width : 650 mm
                     Depht : 100 mm
- Weight according to the adapter : 6,5 à 7,9 kg

  • Colour changer with gel roll. Gel roll (not supplied) needs to be joined with high temperature tape.
  • Dual DC motors ensure that the gel roll remains tight.
  • Incorporated 230/240V power supply allows a single colour changer to be used and easy DMX 512 wiring; 3x0.222 cable, chain with other devices, dimmers, shutters, automatic luminaires ...
  • In analog mode, the maximum number of colours depends on the precision of the control desk.
  • Power supply card and microcontroller card can be disconnected from the front.

  • DMX 512: high impedance. Analog : 0/+10 V DC /1mA.
  • Input and output through male and female XLR 5 sockets at the rear.
  • The control of other changers is possible even if one changer in the link has failed or if the power is off.
  • In the case of signal or power loss, the last gel position is maintained.
  • Yellow «DATA SIGNAL» LED flashes in proportion to the data value.
  • In analog mode, it is possible to adjust the levels of the control desk at 0 or 10 volts.

  • 3 encoding wheels at the front :
    001 to 512 : control of the colour changer in DMX 512
    000 : analog control
    513 to 599 : supplementary functions : ventilation, scrolling speed, automatic loading, check/test

  • The length of the gel roll can vary according to the number of colours to be used as long as the maximum length is not exceeded.
  • After loading the gel roll, an initialization cycle calculates the length of the gel and then divides it into 256 levels to be DMX 512 compatible

  • Override gel ventilation.
    3 modes are possible :
    - Fan set at maximum or off according to the lighting of the photoelectric cell.
    - Fan speed controlled from 0 to 100% by the control desk.
    - Programmable fan speed, between 40% and 100%
  • Green ‘FAN’ LED is lit for maximum ventilation and will flash when ventilation is reduced.

  • In the event of jamming the power to the motors is automatically cut.
  • Red ‘ALARM’ LED indicates malfunction: roller jam, gel roll detaching from the roller, incorrect positioning of the gel etc.
  • Reset of alarms on the changer or from the control desk.


DIAFORA Colour changers
| home | products | retailers | contact |

& Handbooks